The Final Result:
Notes:
* the software used in this tutorial is Adobe Photoshop CS5 Extended
* the size of the final result image is 1024 * 768
* you might want to check the Basix Page to see some useful topics on dealing with Photoshop basics, such as loading palettes and some shortcuts.
Resources:
* Modified Diamond Sparkles Brush.
Step 1:
- Create a new layer on top of the Background layer and call it “Gradient”. Set the Foreground color to #724242, and the Background color to #3c1a1a, then, create a Radial Gradient from the center of the document to one of the corners.
- Double click the “Gradient” layer to add a Gradient Overlay. Change the Bland Mode to Overlay, the Opacity to 80%, the Angle to 45°, and the Scale to 150%. Then click the Gradient box to create it.
- Use the colors #dc4800 (to the left) and #430401 (to the right) to create the Gradient.
- This is what you should get.
- Go to Filter -> Sketch -> Water Paper, and set the values as shown below:
- This will add some nice looking sparkles to the Background.
Step 2:
- Create the text in Black. The font used is Aardvark Cafe and the size is 500 px.
- Double click the text layer and add an Outer Glow. Change the Blend Mode to Vivid Light, the color to #a6dc6b, the Size to 10 and the Range to 100%.
- Change the text layer’s Fill value to 0%. The text should have a very subtle glow effect.
Step 3:
- Right click on the text layer and choose Create Work Path.
- Download the Modified Diamond Sparkles Brush. It is a simple diamond brush, and you can check its settings after you load it under the Brush panel (Window -> Brush). Select this brush before moving on to the next step.
- Create a new layer on top of all layers and call it “Sparkles”. Set the Foreground color to White, and pick the Direct Selection Tool.
- Right click on the path and choose Stroke Path.
- Choose Brush from the Tool drop down menu, and check the Simulate Pressure box.
- This will stroke the path with the sparkles brush. Hit Enter to get rid of the path.
Double click the “Sparkles” layer to apply the “Glow” layer styles:
- Outer Glow: Change the Blend Mode to Color Dodge and the color to White.
- Inner Glow: Just change the color to #f4edd3.
- This will add a simple glow to the sparkles. Change the “Sparkles” layer’s Fill value to 0%.
Step 4:
Choose a soft round brush, and change its setting’s values (Window -> Brush) as shown below.
- Brush Tip Shape:
- Shape Dynamics:
Make sure to choose Pen Pressure from the Size Jitter – Control drop down menu.
- Create a work path once again (right click on text layer -> Create Work Path), create a new layer on top of all layers and call it “Glow”, set the Foreground color to #f8ff99, and stroke the path (right click on the path -> Stroke Path) with the brush, and hit Enter.
Double click the “Glow” layer to add more “Glow” layer styles:
- Outer Glow: Change the Blend Mode to Soft Light, the color to White, and the Size to 2.
- Inner Glow: Change the Blend Mode to Linear Light, the color to #ffb8b8, the Source to Center, and the Size to 2.
- Change the “Glow” layer’s Blend Mode to Overlay. Notice how bright the text is now.
Step 5:
Once again, choose a soft round brush, and change its setting’s values (Window -> Brush) as shown below.
- Brush Tip Shape:
- Shape Dynamics:
Make sure to choose Pen Pressure from the Size Jitter – Control drop down menu.
- Transfer:
- Create a work path, create a new layer on top of all layers, call it “Color” and change its Blend Mode to Color, set the Foreground color to #a7a400, and stroke the path with the brush, then hit Enter.
This will add a nice green tone color to the glow.
* You can stop right here if you like the effect this way. The following two steps are optional, but they add a nice touch to both the Background and the text, making the final effect more winter-holiday-like. *
Step 6:
- Set the Foreground and Background colors back to #724242 and #3c1a1a, then select the “Gradient” layer.
- Go to Filter -> Brush Strokes -> Sprayed Strokes, and change the values as shown below:
- The big sparkles in the Background will disappear, leaving a smoother looking splattered-like texture.
Step 7:
- Create a new layer on top of all layers and call it “Snow Glow”, then double click it to apply some more “Glow” layer styles.
- Outer Glow: Change the Blend Mode to Vivid Light, the color to White, and the Size to 2.
- Inner Glow: Change the Blend Mode to Linear Light, the color to #ffe400, the Source to Center, and the Size to 2.
- Set the Foreground color to White, and use the last brush you created (in Step 5) to draw some “glowing snow – like” strokes along the text edges. You can use the “Eraser Tool” to remove any unwanted areas.
And we’re done!
* the software used in this tutorial is Adobe Photoshop CS5 Extended
* the size of the final result image is 1024 * 768
* you might want to check the Basix Page to see some useful topics on dealing with Photoshop basics, such as loading palettes and some shortcuts.
Resources:
* Modified Diamond Sparkles Brush.
Step 1:
- Create a new layer on top of the Background layer and call it “Gradient”. Set the Foreground color to #724242, and the Background color to #3c1a1a, then, create a Radial Gradient from the center of the document to one of the corners.
- Double click the “Gradient” layer to add a Gradient Overlay. Change the Bland Mode to Overlay, the Opacity to 80%, the Angle to 45°, and the Scale to 150%. Then click the Gradient box to create it.
- Use the colors #dc4800 (to the left) and #430401 (to the right) to create the Gradient.
- This is what you should get.
- Go to Filter -> Sketch -> Water Paper, and set the values as shown below:
- This will add some nice looking sparkles to the Background.
Step 2:
- Create the text in Black. The font used is Aardvark Cafe and the size is 500 px.
- Double click the text layer and add an Outer Glow. Change the Blend Mode to Vivid Light, the color to #a6dc6b, the Size to 10 and the Range to 100%.
- Change the text layer’s Fill value to 0%. The text should have a very subtle glow effect.
Step 3:
- Right click on the text layer and choose Create Work Path.
- Download the Modified Diamond Sparkles Brush. It is a simple diamond brush, and you can check its settings after you load it under the Brush panel (Window -> Brush). Select this brush before moving on to the next step.
- Create a new layer on top of all layers and call it “Sparkles”. Set the Foreground color to White, and pick the Direct Selection Tool.
- Right click on the path and choose Stroke Path.
- Choose Brush from the Tool drop down menu, and check the Simulate Pressure box.
- This will stroke the path with the sparkles brush. Hit Enter to get rid of the path.
Double click the “Sparkles” layer to apply the “Glow” layer styles:
- Outer Glow: Change the Blend Mode to Color Dodge and the color to White.
- Inner Glow: Just change the color to #f4edd3.
- This will add a simple glow to the sparkles. Change the “Sparkles” layer’s Fill value to 0%.
Step 4:
Choose a soft round brush, and change its setting’s values (Window -> Brush) as shown below.
- Brush Tip Shape:
- Shape Dynamics:
Make sure to choose Pen Pressure from the Size Jitter – Control drop down menu.
- Create a work path once again (right click on text layer -> Create Work Path), create a new layer on top of all layers and call it “Glow”, set the Foreground color to #f8ff99, and stroke the path (right click on the path -> Stroke Path) with the brush, and hit Enter.
Double click the “Glow” layer to add more “Glow” layer styles:
- Outer Glow: Change the Blend Mode to Soft Light, the color to White, and the Size to 2.
- Inner Glow: Change the Blend Mode to Linear Light, the color to #ffb8b8, the Source to Center, and the Size to 2.
- Change the “Glow” layer’s Blend Mode to Overlay. Notice how bright the text is now.
Step 5:
Once again, choose a soft round brush, and change its setting’s values (Window -> Brush) as shown below.
- Brush Tip Shape:
- Shape Dynamics:
Make sure to choose Pen Pressure from the Size Jitter – Control drop down menu.
- Transfer:
- Create a work path, create a new layer on top of all layers, call it “Color” and change its Blend Mode to Color, set the Foreground color to #a7a400, and stroke the path with the brush, then hit Enter.
This will add a nice green tone color to the glow.
* You can stop right here if you like the effect this way. The following two steps are optional, but they add a nice touch to both the Background and the text, making the final effect more winter-holiday-like. *
Step 6:
- Set the Foreground and Background colors back to #724242 and #3c1a1a, then select the “Gradient” layer.
- Go to Filter -> Brush Strokes -> Sprayed Strokes, and change the values as shown below:
- The big sparkles in the Background will disappear, leaving a smoother looking splattered-like texture.
Step 7:
- Create a new layer on top of all layers and call it “Snow Glow”, then double click it to apply some more “Glow” layer styles.
- Outer Glow: Change the Blend Mode to Vivid Light, the color to White, and the Size to 2.
- Inner Glow: Change the Blend Mode to Linear Light, the color to #ffe400, the Source to Center, and the Size to 2.
- Set the Foreground color to White, and use the last brush you created (in Step 5) to draw some “glowing snow – like” strokes along the text edges. You can use the “Eraser Tool” to remove any unwanted areas.
And we’re done!
No comments:
Post a Comment